Reading time: 6 mins
How to clean your sexdoll without moving her and doing almost nothing?
Rinsing, cleaning, ultra violet disinfection and drying with a minimum amount of water, I give you my complete method optimized for laziness and pleasure.
You're tired of carrying your TPE doll into the shower at 11.00 p.m., you'd like to fall asleep next to her in the evening after a good exhausting session. As a naughty boy, you can get two or even three dolls dirty in the same bed.
Then this article is for you.
For this, we'll need a little cotton, technology and common sense. Here's the key, decrease germs, remove them as quickly as possible and ensure flawless drying to avoid mold.
The method in a nutshell
You've just transferred your wealth to your doll, but you've still got a little strength left to take a couple of tampons to avoid making it all go to waste.
- insert tampons 10 - 20 mins into the orifices used to drain off the bulk of the lubricant and body fluids
- connect WM Doll intelligent machine and rinse with clean water
- drain the waste water and repeat the operation with soapy water
- rinse with clean water
- run an ultraviolet (UV) disinfection cycle
- dry with new tampons
What you need:
- less than five liters of water
- a few tampons
- a bottle of water
- la machine intelligente WM Doll
Best practices
To avoid literally rotting your TPE doll, it is crucial to reduce the supply of germs and keep the area clean and perfectly dry from first use sex doll.
- always arrive clean, for example by washing at the sink
- avoid ejaculating inside or be reactive about cleaning, consider the female condom
- orifices must be perfectly dry
Disclaimer ⛔
TPE is a porous material that can be compared to a sponge, albeit much more waterproof. It is necessary to evacuate germs & fungi before they sink into the material. So it's easy to understand why cleaning her love holes with a wipe is like washing your hands with water.
There's not much point.
If you're still using this type of method, the question is no longer whether it's proliferating inside, but when you'll have your first itching or mycosis.
Few talk about it in public, but in private messages, tongues are wagging. A plethora of doll owners are coming to realize, or even admitting half-heartedly, that mistakes have been made.
It's very difficult to get to the bottom of the holes in a TPE doll and guarantee that 100 % of the surface has been thoroughly cleaned. It is therefore unrealistic to assume that the surface is germ-free.
☝️ This beautiful 6YE minx is 3 years old and she's fresh as new
Silicone can of course go mouldy
Among the top lunar beliefs to be found on the web is the religion that silicone is invincible and cannot go mouldy. There are only a few possible explanations if you still believe that.
- you've never taken a single shower or bath in a modern country
- you are clearly intoxicated
- the madness has overtaken you
Solution: take a look at your poorly cleaned, field-black shower seals - they're made of silicone!
No more denies joke, it's time to clean up.
Automatic cleaning machine WM Doll
For the fellow French, Ava Love Doll has translated and even corrected the instructions for you, which you can download below. For English speakers, the manual is supplied with the machine.
The WM Doll intelligent cleaning machine offers an automatic cycle, which may be suitable depending on the lubricant used. However, I didn't find this sufficient and prefer to run the cycles manually.
Rinsing, washing, rinsing again, draining, drying and UV disinfection are all part of the automatic cycle. Please note that for optimum drying with the machine, your doll must be standing upright.
As mentioned above, the method is optimized for lazy people and pleasure, so the doll will remain lying down. The machine's drying function is ineffective if the doll is lying down, as the draining won't work properly. This problem is solved with the use of tampons.
Why & how to use the machine in manual mode?
In its video presentation, WM Doll empties an A container in favor of a B container. Perfect in theory, but doesn't work in practice. So let's do a first rinse cycle in a closed circuit.
The advantages, you use very little water.You can go about your business, with no risk to the doll or the machine.
Similarly, if the system is correctly inserted into the love hole, you don't need to hold it. Just make sure you check for leaks at launch.
1. After removing the first tampons soaked with lubricant and more, run a 30-minute cycle with clear water, the machine will automatically switch off. Dispose of the waste water and refill your container with soapy water this time.
2. Rerun the same cycle with soapy water for another 30 minutes. If you have any doubts or need to do anything, don't hesitate to run a second cycle.
3. Finally, run a UV disinfection cycle for 30 to 60 minutes. Unplug the WM machine or switch to the other port, then insert the tampons as explained this post to dry the orifice.
After 10 to 20 minutes, the tampons, especially the bottom one, are saturated. Discard the two most saturated tampons and pick up the barely damp inlet tampon.
Insert it at the bottom to ensure perfect drying.
Please note that not all tampons are equally absorbent. The cheapest are generally the least effective, and you may need to use twice as many.
Here are the ones I now use, although they are a little more expensive, I use half as much.
0 cleaning with the reusable female condom
I thought it would be interesting to mention this method, which I don't personally use, but which will enable you to make quickies effortlessly. The female condom is washable, reusable and inexpensive given the number of possible uses (dozens).
Usually sold in boxes of three, it's almost a sign, even if I recommend avoiding putting big things in their mouths!
Insert the female condom into your doll's orifice(s), lubricate and slide yourself in. Afterwards, simply remove the condom, wash it in the sink and let it air-dry.
Super lazy? Go to sleep next to your sexdoll and take care of it tomorrow!
