Has your love doll suffered in transit and flattened her breasts? Would you like to shape your poupée sexuelle silicone pour adulte ? Do you like this TPE body, but the chest is too small for your taste?
At Ava Love Doll, we love dolls so much that we've come up with a solution to make it all happen!
Our gel kit allows you to :
- reshape breasts and buttocks made of gel that have flattened or sagged over time
- inject a hollow TPE breast to make it more realistic
- breast augmentation to gain several cup sizes
Alternatively, you can also do it with air, but the effect will be different. The complete technique is in this post.
Silicone doll This before-and-after is more than convincing, both visually and to the touch.
How to use the gel kit
- mix
- inject
- please wait
The gel kit consists of two liquids, A and B, to be mixed at a ratio of 1:1.
A small needle for visually discreet piercing and a larger one for injection.
One 50 ml piston.
Using a spatula, knife or ideally a metal object, mix energetically liquid A for several minutes.
Using another spatula, repeat the operation, mixing in liquid B.
Then mix the two liquids together to obtain a perfect consistency, it must be homogeneous.
Choose a strategic place to fill the crushed area and distribute the gel in the right place.
Depending on the shape of the nipple, it may be useful to inject right in the middle or under the breast for discretion.
You have to push hard to inject, that's normal, the material is thick.
After filling, some gel will ooze out, especially if you've tried to increase the size of her breasts. Blot regularly with a paper towel, for example. Keep a close eye on it for an hour, until the gel has sufficiently polymerized.
When the oozing stops, the operation is complete. Wait at least 72 h to allow the polymerization process to take full effect. If you're a stickler for detail and are working on a TPE doll, you might consider smoothing the drilling point with a heat gun or straightener to achieve a perfect finish.
Disclaimer
When the jars are open or your mixing is in progress, act quickly. Everything should be ready: the doll is positioned, you know where you're going to inject, and there's something to wipe your hands with and needles within easy reach.
Silicone is injectable for 10 - 15 minutes. After this average time, the polymerization will be too far advanced and you won't be able to inject it, as it will get stuck in the syringe.
Be sure to clean the syringe and plunger immediately after use to prevent too much silicone from drying inside and rendering them inoperative.
To keep your gel in good condition over time, keep the jars closed as follows as watertight as possible and protect from light. Do not refrigerate, store at room temperature.
What quantity for what use?
Each jar is 100 ml for a theoretical mix of 200 ml.
In practice, you can count on a possible injection of around 180 ml.
In the video above, I'm injecting relatively large breasts into a 163 cm F-cup Future Doll carried on the belly. Each breast is the equivalent of half a handball, and they're really badly damaged.
One kit is enough for most large doll breasts. If you need to fill the hollow breasts of a TPE doll, the 200 ml will be more than enough for most dolls.
What are the benefits of gel injection?
Gel breasts come as standard on most silicone dolls, and are clearly the most realistic in terms of touch, movement and feeling of heaviness.
For TPE doll, it's generally possible to choose between three types of breast.
- the solid breat, which, as its name suggests, is made of 100 % TPE.
- the hollow breast, whose core is devoid of TPE, usually filled with air or cellulose wadding. The breast is lighter in the hand, but softer than the solid version.
- and the gel version which is no more and no less than a hollow breast filled with silica gel, much softer than the TPE itself.
If you missed out on this option and your love doll has hollow breasts, the gel kit can be used to fill them. Heavier, they'll be softer and swing more than the hollow version.
Does the gel also work on the buttocks of silicone dolls?
Yes, the gel can be injected into silicone buttocks to reshape them or compensate for crushing during transport. Inject slowly to reshape the right areas and avoid over-deforming the buttocks.
Sometimes it's necessary to inject in several places to get the perfect buttocks, so don't hesitate to take your time to do things right.
I am concerned that my doll will arrive with deformed breasts and buttocks. I do not know if I will be able to recreate their appearance.
Hello Jacek,
Thank you for your comment. In this case, please contact us as soon as possible and we'll suggest a solution.